| Product | Weld Procedure | Wire Dia. mm | Hardness HRC | Typical All Weld Metal Analysis (%) | Properties and Applications | ||||||||||
| C | Mn | Si | Cr | Ni | Mo | W | V | Nb | Fe | Oth. | |||||
| WELD 258SD-G | G | 1.2/1.6 | 58 | 0.5 | 1.2 | 0.5 | 7.2 | 3.5 | 2.0 | 0.5 | Bal | Strengthened alloy of H13 type，highly wear resistant. | |||
| WELD 336-G | G | 1.2/1.6 | HB150 | 0.1 | 3.0 | 0.1 | 36 | Bal | Suitable for welding cast iron, joining steel and cast iron and cast cavity welding. | ||||||
| WELD 336HT-G | G | 1.2/1.6 | HB130 | Special Designed Alloy | |||||||||||
| WELD 100XS-O | O、G | 1.6 | 60 | 4.8 | 0.5 | 0.8 | 28 | Bal | High chromium-iron alloy with stress-relief crack, highly resistant to severe abrasion and moderate impact, used as cladding for coal, cement, mineral and sinter industry. | ||||||
| WELD 142-G | G | 1.6 | 42 | 1.8 | 0.5 | 0.8 | 28 | 3.0 | 0.8 | Bal | Resistant to wear and corrosion and crack free weld is possible. Typical applications are in chemical, rubber and food industry. | ||||
| WELD 170-G | G | 1.6 | 65 | Special Designed Alloy | Special alloy with submicron range crystalline, features excellent abrasive resistance in combination of heavy impact. Best results by welding in 1-2 layers. | ||||||||||
| WELD 190WC | G | 1.6 | 60 | Fe-C-W Matrix + 60%WC | Suitable for application where extreme abrasive wear is encountered. | ||||||||||
| WELD 191WC | G | 1.6 | 60 | Alloyed Fe Matrix + 40%WC | Suitable for application where extreme abrasive wear is encountered. | ||||||||||
Notes：S—Sub-arc weld，O—Self-shielding weld，G—Gas shielding weld ，T—TIG weld
Copyright © 2022 SUZHOU WEIAODE WELDING MATERIALS TECHNOLOGY CO., LTD. ALL RIGHTS RESERVED.